Outdoor AC1200 Gigabit Wireless Access Point, Model: AP1300 Outdoor
- Stok: Stokta Var
- Ürün Kodu: AP1300-Outdoor
● AC1200 Dual Band Wi-Fi
● MT7621DAT+MT7613B+MT7603E
● 1× Gigabit WAN/LAN
● 1× WPS Button
● 1× Reset Button
● 802.3at/af PoE or Passive PoE
● MU-MIMO/OFDMA
● Fat/Fit AP mode
● IP65 WaterProof
● Mesh
 |  |
Speedy Dual-Band AC1200 Wi-Fi With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices. | Boosted Wi-Fi Coverage with Beamforming Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP. |
Plug-and-Play Mesh Installation
 |  |
Simply Plug and Unplug for Mesh Setup Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately) | Leave the Rest to Adaptive Routing Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability. |
Guide to Wiring and Physical Installation
 |  |
Gigabit Port with Two PoE Options Supports two powering methods— | Mounting Kit Included A mounting kit is included in the box, supporting— |
Specifications
| Hardware Features | Highlights | CPU: 880 MHz Dual-Core Processor |
| Flash: 16 MB (128 Mbit) | ||
| DDR: 128 MB (1 Gbit) | ||
| Interface | 1× Gigabit Ethernet (RJ-45) Port (Support IEEE802.3af PoE and Passive PoE) | |
| 1× Reset Button | ||
| Power Supply | 802.3af/at PoE | |
| 24-57 V Passive PoE (+4,5pins; -7,8pins) | ||
| Dimensions ( W×D×H ) | 240×100×53.7mm | |
| Antenna Type | 2× Detachable Omni-directional Antennas | |
| Mounting | Pole/Wall Mounting (Kits included) | |
| Wireless Function | Wireless Standard: | Wi-Fi 5 (802.11ac/n/g/b/a) |
| Frequency: | 5 GHz, 2.4 GHz | |
| Signal Rate: | 5 GHz: Up to 867 Mbps | |
| 2.4 GHz: Up to 300 Mbps | ||
| Bandwidth | 20/40/80 MHz | |
| Wireless Functions | Multiple SSID | |
| Enable/Disable Wireless Radio | ||
| Transmit Power Control | ||
| QoS (WMM) | ||
| Mesh (Requires a Cudy Mesh unit/Mesh router/AC as the gateway with firmware newer than 15.28) | ||
| Band Steering | ||
| MU-MIMO | ||
| Beamforming | ||
| Rate Limit | ||
| Reboot Schedule | ||
| Wireless Schedule | ||
| Wireless Encryption | WPA-PSK | |
| WPA2-PSK | ||
| WPA-PSK/WPA2-PSK | ||
| Security | Access Control | |
| Mac Filtering | ||
| Wireless Isolation Clients | ||
| Weather-Proof | Water-Proof | IP65 (Protection against any dust and low-pressure water from any directions) |
| Lightning Protection | 4 KV Lightning/Surge protection at the Ethernet port | |
| Operating Mode | Access Point Mode | |
| Router Mode | ||
| RE Mode | ||
| WISP Mode | ||
| Package Contents | Outdoor Wireless Access Point | |
| 2× Detahcable Wi-Fi Antennas | ||
| 24 V Passive PoE Adapter | ||
| Mounting Kits | ||
| Installation Guide | ||
| Environment | Operating Temperature: -20~60 °C (-10~140°F) | |
| Storage Temperature: -40–70 °C (-40–158 °F) | ||
| Operating Humidity: 10–90% RH non-condensing | ||
| Storage Humidity: 5–90% RH non-condensing | ||
| System Requirements | Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux | |
